Possible malfunctions of the rear suspension, their causes and solutions (Chevrolet Cruze 1 2008-2016: Chassis: Rear suspension)

Cause of malfunction	Remedy
Noise and knock in suspension
Defective shock absorber	Replace shock absorbers
Loose shock absorber or worn lug bushings shock absorber	Tighten the lower and upper shock absorber mounting bolts or replace bushings
Wear of silent blocks of longitudinal suspension arms	Replace silent blocks
Settling or broken spring	Replace springs
Rear wheel bearing failure	Replace hub
Driving the vehicle away from straight ahead
Inconsistent air pressure in tires	Set normal tire pressure
Different wheel wear or tread pattern	Change tires
Broken camber angle	Eliminate the cause of the violation of the camber and toe angles and adjust the angles
Sediment or breakage of one of the springs	Replace springs
Deformation of trailing arms	Replace deformed levers
Wear of silent blocks of longitudinal suspension arms	Replace silent blocks
Excessive noise or uneven tire tread wear
Tire pressure not correct	Set normal pressure
Wheel alignment parameters are violated	Eliminate the causes of violation of the parameters of the installation of wheels, adjust wheel alignment
Car overload	Don't overload your car
Wheel imbalance	Balance the wheels