Attachments include side doors, hood, trunk lid, front fenders, front and rear bumpers. Side doors, hood, trunk lid are hinged to the body, front fenders are bolted.
The side doors are equipped with sliding windows. Depending on the configuration, the vehicles are equipped with power windows in the front and rear doors. To protect against side impact, the doors are reinforced with a special impact-resistant beam.
The glass of the side doors and sidewalls, as well as the rear glass, are bent, polished, tempered. Windshield glass is three-layer. Windshield glass, rear window, side glass are glued into the corresponding openings of the body. The windshield and rear window are electrically heated.
The front and rear bumpers are plastic, painted in body color, attached to the body with bolts, screws and plastic clips. In a collision at low speeds up to 4 km/h, the front and rear bumpers can absorb the energy of relatively small impacts, minimizing repair costs.
The front seats are separate, with mechanical adjustment of the longitudinal position and the angle of the backrest. On cars of the Chevrolet Cruze family, depending on the configuration, additional adjustment of the lumbar support in the back of the driver's seat is provided. The seat headrests are easily removable, height-adjustable, mounted on the backs of all seats. The rear seat includes a cushion and two backrests. If necessary, the rear seat backrests can be folded in parts to increase the capacity of the luggage compartment.
Seat belts for the driver and all passengers are inertial.
In order to improve passive safety, the car is equipped with an SRS system. It includes airbags for the driver and front passenger, which are triggered at the time of the accident. Depending on the configuration, side airbags can be installed.
The car interior is equipped with an energy-absorbing instrument panel, a cigarette lighter, an ashtray, sun visors, a heating, ventilation and air conditioning system, a rear-view mirror, and handrails.
The volume, temperature, direction and intensity of air flows are regulated by switches installed in the control unit for the heating, ventilation and air conditioning system.
Exhaust ventilation is carried out through grilles, which are located on the side linings of the luggage compartment of the body.
For towing, the vehicle is equipped with three welded eyelets at the front and one at the rear.
Helpful hints: Do not cover the body with a cover made of dense material during a long parking of the car. A rain-soaked cover creates steam when heated in the sun «bath», the body paint underneath may peel off and swell. In addition, under gusts of wind, the cover moves and erases the paint on the protruding parts of the body.
Do not place rubber objects on the body. After a while, the rubber will leave on the surface (especially light) indelible stains. From time to time, run a thin metal plate between the side glass and the rubber lining on the door to remove dust, sand and protect the glass from scratches.
After washing, be sure to remove the rubber mats and dry the interior. Moisture under rugs is the main cause of floor corrosion.