1. Remove the front door upholstery and moisture barrier film (see «Removal and installation of an upholstery of a forward door»),
2. Remove the front door glass («Front door glass replacement»).
3. Remove the outer handle and disconnect the rod from the lever of the front door lock cylinder (see «Replacing the outside handle of the front door»).
4. Turn out two screws of fastening of the lock to the panel of a door.
5. Remove the lock by pulling it out through the access hole in the door panel...
6....slide the latch...
7.... disconnect the wiring harness block and completely remove the lock.
8. Disconnect from the lock lever from the lock cylinder
9. Pry with a screwdriver...
10....and lift the lid to expose the cable end of the inner handle.
11. Remove the tip of the cable sheath from the lock holder...
12.... Disconnect the tip of the cable from the lock lever and remove the cable.
13. Disconnect from the lock lever draft of a drive of blocking of the lock.
14. For removal of a latch of the lock of a door turn out two screws of its fastening to a rack of a body and remove a latch.
Note: If necessary, adjust the clarity of the lock by moving the latch, loosening the screws securing it.
15. Install the front door lock and all removed parts in the reverse order of removal.