Withdrawal procedure
1. Disconnect the cable from the negative battery terminal.
2. Remove the nut and pedal axle.
3. Disconnect the return spring from the clutch pedal bracket.
4. Remove the retaining clip from the clutch pedal.
5. Remove pushrod from clutch pedal.
6. Remove the clutch pedal.
Installation order
1. Install the clutch pedal.
2. Lubricate the tappet with multipurpose grease.
3. Insert pushrod into clutch pedal.
4. Install the retainer clip on the clutch pedal.
5. Lubricate the pedal axle with multipurpose grease.
6. Attach the return spring to the pedal bracket.
7. Install the nut and pedal shaft.
Tighten
Tighten the pedal axle nut to 18 Nm (13 lb-ft).
8. Connect the wire to the negative terminal of the battery.