Removal procedure
1. Disconnect the negative battery cable.
2. Disconnect the intake air temperature sensor connector (IAT).
3. Loosen the clamp and disconnect the air filter outlet hose from the resonator.
4. Remove the air cleaner housing screws.
5. Remove the housing from the ball stud and remove the air filter assembly.
Installation procedure
1. Install the air cleaner assembly.
2. Install the air filter housing onto the ball stud and connect the air filter outlet hose to the resonator.
3. Install the air cleaner housing screws.
Tighten
Tighten the air cleaner housing bolts to 6 Nm (53 lb-in.).
