Removal procedure
1. Disconnect the cable from the negative battery terminal.
2. Loosen the screws at the base of the instrument panel compartment.
3. Loosen and remove screws.
4. Disconnect electrical connector.
5. Remove the instrument panel compartment.
Installation procedure
1. Place the instrument panel compartment in the instrument panel.
2. Connect the wire to the negative terminal of the battery.
3. Install the instrument panel compartment with the screws.
Tighten
Tighten the instrument panel compartment screws to 2 Nm (18 lb-in).
4. Connect the wire to the negative terminal of the battery.