Withdrawal procedure
1. Raise the vehicle and place it on the supports provided for this purpose.
2. Remove the cover and nuts from the top of the rack.
3. Remove wheels. See Part 2E. Tires and wheels.
4. Remove the brake hose bracket bolt.
5. Remove the nuts and bolts securing the strut bracket to the steering knuckle.
6. Remove the top nut securing the stabilizer link to the telescopic strut.
7. Remove the telescopic pole assembly.
Installation order
1. Install the bolts and nuts securing the strut assembly to the steering knuckle.
Tighten
Tighten the nuts and bolts of the rack assembly to a torque of 180 Nm (133 lb-ft).
2. Install the brake hose bracket-to-strut bolt.
Tighten
Tighten the brake hose bracket bolt to 15 Nm (11 lb-ft).
3. Install the cover and nuts on the top of the strut.
Tighten
Tighten the upper nuts securing the front suspension strut to the body until a torque of 30 Nm is reached (22 lb-ft).
4. Install the upper stabilizer bar nut to the telescopic strut. See section in this part «Front stabilizer»
5. Install wheels.