Removal procedure
1. Remove the caliper bracket.
2. Remove the disc lock screw.
3. Remove the brake disc.
4. Disconnect the ABS sensor connector.
5. Loosen the hub bolts.
6. Remove the hub, shoe and parking brake shield assembly.
7. Remove the upper and lower return springs and clearance adjuster from the parking brake shoe and shield assembly.
8. Remove the retainer spring washer, spring and retainer spring post.
9. Remove the parking brake shoe.
10. Remove the parking brake cable from the shield.
Installation procedure
1. Install the parking brake cable on the shield.
2. Install the retainer spring post, parking brake shoe, spring and retainer spring washer.
3. Install the clearance adjuster, lower and upper return springs.
4. Install hub with bolts.
Tighten
Tighten hub bolts to 65 Nm (48 lb-ft).
5. Connect the ABS sensor connector.
6. Install disc with set screw.
Tighten
Tighten the brake disc stop screw to 8 Nm (71 lb-in).
7. Install the caliper bracket with the bolts.
Tighten
Tighten the caliper bracket bolts to 100 Nm (74 lb-ft).
8. Install the wheel.