Removal procedure
1. Remove the master cylinder. See Part 4B, "master cylinder».
2. Remove the clamp securing the vacuum hose to the vacuum booster.
3. Disconnect the vacuum hose from the booster. See procedure «vacuum hose» in this section.
4. Disconnect the retainer from the vacuum booster pusher.
5. Remove the vacuum booster mounting nuts from the studs located on the dashboard and remove the booster.
Installation procedure
1. Install the booster and mounting nuts to the dashboard.
Tighten
Tighten the nuts securing the vacuum booster to the dashboard to a torque of 22 Nm (16 lb-ft).
2. Install the master cylinder to the booster. See Part 4B, "master cylinder».
3. Install a new vacuum hose. See procedure «vacuum hose» in this section.
4. Attach the retainer to the push rod of the brake booster.
5. Check the operation of the amplifier. See «Checking the operation of the vacuum booster» in this section.