Removal procedure
1. Disconnect the cable from the negative battery terminal.
2. Loosen the screws and remove the small items box on the rear console.
3. Remove the rear console cover and disconnect the connector.
4. Loosen the screws and remove the heating mat switch.
Installation procedure
Note: Direct contact of dissimilar metals can lead to rapid corrosion. Use proper fasteners to prevent premature corrosion.
1. Install the heating mat switch with the screws.
Tighten
Tighten the heating mat switch screw to 2 Nm (18 lb-in).
2. Connect the connector and install the rear console cover.
3. Install the small items box on the rear console with the screws.
Tighten
Tighten the screws for the storage box on the rear console to 2 Nm (18 lb-in).
4. Connect the wire to the negative terminal of the battery.