Removal procedure
1. Remove the front seat from the vehicle. See «front seats» in this section.
2. Remove the back panel.
3. Remove trim from each seat.
4. Disconnect electrical connectors.
5. Remove bolts and seat back.
Installation procedure
1. Install the seat back onto the seat cushion.
Note: Direct contact of dissimilar metals can lead to rapid corrosion. Use proper fasteners to prevent premature corrosion.
2. Install the front seat back bolts.
Tighten
Tighten the front seat back bolts to 45 Nm (33 lb-ft).
3. Connect electrical connectors.
4. Reinstall seat trim to original position.
5. Install the back panel on the seat.
6. Install the front seat in the car. See «front seats» in this section.