Removal procedure
1. Disconnect the negative battery cable.
2. Remove the decorative panel of the audio system. See section 9F, "Audio systems".
3. Loosen the four fixing screws of the control panel.
4. Disconnect electrical connectors.
5. Remove control panel.
Installation procedure
1. Connect the electrical connectors to the sockets on the back of the control panel.
2. Install the control panel by gently pushing it into place on the center console.
3. Tighten the fixing screws.
Tighten
Tighten the fixing screws of the control panel with a torque of 2.5 Nm (22 lb-in).
4. Connect the negative battery cable.
5. Make sure that the control unit functions correctly by sequentially setting all possible operating positions.
6. Install the audio trim panel. See section 9F, "Audio systems".