Removal procedure
1. Disconnect the cable from the negative battery terminal.
2. Adjust the mirror glass so that it is in a strictly vertical position.
3. Wrap the end of the slotted screwdriver with tape or a clean cloth.
Note: The heating element is located behind the mirror glass and may be damaged when removing the mirror glass. Extreme care must be taken when dismantling the mirror glass.
4. Insert a screwdriver into the slot on the inside of the mirror.
5. Carefully separate the mirror glass from the motor assembly using the screwdriver as a lever.
6. Remove the exterior mirror glass.
7. Disconnect the heated mirror connector.
Installation procedure
1. Connect the heated mirror connector.
2. While supporting the mirror housing, press the mirror glass flat against the motor assembly until it snaps into place.
3. Connect the wire to the negative terminal of the battery.