The evaporative emission system adsorber is removed for inspection or replacement if there is a persistent smell of gasoline caused by a leak. In addition, a violation of the tightness of the adsorber can cause unstable operation of the engine at idle until it stops.
1. Remove the fuel tank (see «Replacing the fuel tank and its filler pipe»).
2. Press the latch of the steam pipe nozzle...
3.... and disconnect the steam line from the adsorber fitting.
4. Disconnect the second steam line in the same way.
5. Remove the ventilation hose from the holder on the fuel tank.
6. Press the latch...
7.... and remove the canister by sliding it up from the fuel tank bracket.
8. Remove the ventilation hose from the adsorber branch pipe.
9. Install the adsorber in the reverse order of removal.