Set includes two keys (main and spare) with remote control locks and tag B with the number of the series of keys.
GOOD HINT: Save the tag. Then, in case of loss of the key, you will not have to change the locks - the key can be ordered at the factory.
To prevent damage to clothing, the core of the main key is retracted into its body.
To bring the key into working position, press the button on its body...
...and the key stem will swing forward under the action of the spring. In order to return the key stem to its original position, press the button, turn the key by hand until it enters the groove on the body and snaps into place with the lock.
To lock all vehicle doors, press button B. To unlock the locks, press button B. To unlock only the trunk lid lock (tailgate) press button A.
NOTE: Depending on the vehicle equipment, the anti-theft alarm and power windows of all doors can be additionally actuated by buttons on the key.
If the key's remote control battery begins to run low and the range of the device decreases, it may take several button presses to operate the systems. In this case, replace the battery as soon as possible.
To replace the battery in the key, follow these steps.
1. Unfasten the cover of the remote control of the main key, overcoming the resistance of its lock...
2.... and remove the cover.
3. At the spare key, pry off the remote control cover with a thin-blade screwdriver...
4....and remove it.
NOTE: The further procedure is the same for both keys.
5. Remove the battery from the remote control.
6. Install a new battery in the reverse order of removal.
NOTE: The remote control uses a CR2032 battery. Pay attention to the markings to purchase exactly the same new battery.
WARNING: When installing the battery, observe the polarity: the positive pole of the battery must be on top.