NOTE: The operation is shown on the example of a car with a sedan body. On a hatchback car (differs only in the shape of the lantern) work is done in the same way.
1. Disconnect the wire from the terminal «minus» battery.
2. Open the trunk lid.
3. Turn out two screws of fastening of a lantern to a body.
4. Pull back...
5.... and, overcoming the force of the guide pins, take the lamp away from the car body.
6. Turn the lamp socket counterclockwise...
7.... and remove it from the lantern.
8. Remove the other two cartridges in the same way...
9.... and remove the lantern.
10. Install the lamp in the reverse order of removal.
NOTE: When installing the light, its guide pins...
...must fit into the appropriate openings in the bodywork.