NOTE: The operation is shown on the example of a car with a sedan body. On a hatchback car (only the shape of the lantern is different) work is done in the same way.
1. Disconnect the wire from the terminal «minus» battery.
2. Open the trunk lid.
3. Turn out two screws of fastening of a lantern to a body.
4. Pull the lantern towards the back...
5.... and, having removed the guide pins from the holes, take it away from the body.
6. Turn the lamp socket counterclockwise...
7.... and remove it from the lantern.
8. Press the bulb lightly into the socket, turn it counterclockwise and remove it from the socket.
9. Install a new lamp in the socket.
10. Similarly replace other lamps.
11. Establish a lantern in an order, the return to removal.
NOTE: When installing the light, its guide pins...
...must fit into the appropriate openings in the bodywork.