NOTE: The rear suspension hub is non-separable. If its bearing fails, the hub is replaced as an assembly.
1. Brake the vehicle with the parking brake and set the wheel chocks («shoes») under the wheels. Loosen the wheel nuts on the side of the hub being removed.
NOTE: This subsection describes the replacement of the left rear hub, the right hub is replaced in the same way.
2. Raise the rear of the car with a jack and place it on a support. Remove the wheel and lower the parking brake lever all the way down (the car is disinhibited).
3. Remove the rear wheel brake drum (see «Removal and installation of a brake drum», With. 205).
4. Turn out four bolts of fastening of a nave to a fist...
5.... and remove the hub while holding the brake mechanism.
6. Establish a nave in sequence, return to removal.