The rear center seat belt reel is located inside the right side of the rear seatback. Therefore, if it is necessary to replace it, contact a specialized service center or replace the right side of the backrest assembly. The coils of the rear side belts are installed on the rear shelf of the body. You can remove them yourself. The coils are fixed in the same way using the same fasteners. Operation is shown using the left rear belt as an example.
1. Pull up on the front edge of the rear seat cushion and remove the cushion attachment tabs from the holders.
2. Lift the rear edge of the seat cushion to release the seat belt buckles from the holes in the cushion...
3.... and remove the pillow from the passenger compartment.
4. Remove the left side of the rear seat back (see «Removal and installation of a back seat»).
5. Turn out a bolt of a buckle of the bottom fastening of a belt to a body...
6.... and disconnect the buckle from the body.
7. Remove the upper facings of the rear pillars of the body...
8.... and lining of the rear shelf, see «Removal and installation of facings of salon»).
9. Turn out a bolt of fastening of an inertial coil of a belt to a back shelf...
10.... and remove the belt.
11. Install the belt in the reverse order of removal. 5.
If it is necessary to remove the rear seat belt buckles, do the following.
1. Pull up on the front edge of the rear seat cushion and remove the cushion attachment tabs from the holders.
2. Lift the rear edge of the seat cushion to release the seat belt buckles from the holes in the cushion...
3.... and remove the seat cushion.
4. Turn away a nut of fastening of locks of the left and central belts...
5.... and remove the locks.
6. Turn away a nut of fastening of the lock of the right back belt (the nut also secures the lower buckle of the rear center seat belt).
7. Remove the right rear belt buckle.
8. Install the locks in the reverse order of removal.