Tighten the bearing adjusting ring until there is no radial play in the differential. Adjust the differential bearing preload.
Old bearings: 1 Nm torque required to rotate differential at 60 rpm.
New bearings: Requires 2 Nm of torque to rotate the differential at 60 rpm.
Tighten or loosen the bearing ring adjuster to obtain the desired preload on the bearings.
Install the bearing adjustment ring retainer and tighten the fastening screw to 5 Nm.
12. Install the differential cover gasket, differential cover and tighten the fastening screws to a torque of 40 Nm.