Car wheel drive Chevrolet Aveo 1.5 (T250)

General description of the front drive axle
Drive shafts are the elements of transmission of torque to the front wheels, which allow the wheel to move freely within the allowable suspension movements and...

Front axle device
1. Drive shaft fastening nut 2. Outer CV joint 3. Drive shaft 4, 6, 7, 9. Cover clamp 5. Cover of the outer CV joint 8. Cover inner CV joint 10. Retaining ring...

The device of the hinge of equal angular velocities (SHRUS)
1. Ball joint of equal angular velocities (SHRUS) complete (Rzeppa type) 2. Hub shaft 3, 5, 7, 9. Cover clamp 4. Cover of the outer joint of the drive shaft 6....

Removing the front wheel drive shaft
Withdrawal 1. Raise and secure the vehicle. 2. Remove wheels. 3. Remove the lower protective pallets of the engine. 4. Turn off a nut of fastening of a power...

Installing the front wheel drive shaft
Installation 1. Clean the hub and gearbox housing seals. 2. Install the drive shaft in the final drive. 3. Install the wheel hub onto the splined end of the...

Replacing the cover of the outer CV joint
Withdrawal (for automatic transmission) 1. Remove the drive shaft. See chapter 'Drive axle assembly*' in this section. 2. Remove the large boot strap. 3....

Replacing the cover of the inner CV joint (for automatic transmission)
Withdrawal 1. Remove the drive shaft. 2. Remove the large boot strap. 3. Remove the small collar of the boot. 4. Remove the hinge body from the boot. 5. Remove...

Replacing the cover of the outer hinge (for manual transmission)
Withdrawal 1. Remove the drive shaft. 2. Remove the large boot strap. 3. Remove the small collar of the boot. 4. Remove grease from the hinge. 5. Remove the...

Replacing the CV joint boot with a transverse groove
Withdrawal 1. Remove the large boot strap. 2. Remove the small collar of the boot. 3. Remove grease from the pivot housing. 4. Remove the shaft retaining ring...