2. Install the oil pan on the engine block.
Attention: install the oil pan 5 minutes after applying the sealant-gasket to the oil pan.
3. Tighten the oil sump bolts to 10 Nm.
4. Connect the flanges of the catalytic converter to the flanges of the exhaust manifold and exhaust pipe of the muffler.
5. Tighten the nuts securing the catalyst to the exhaust manifold and the bolts securing the bracket to 40 Nm.
6. Tighten nuts of a reception pipe of the muffler and a connecting pipe the moment of 30 Nm.
7. Connect the rear oxygen sensor connector.
8. Connect the negative battery cable.
9. Install the oil sump drain plug.
10. Tighten the oil sump drain plug to 35 Nm.
11. Fill the oil pan with engine oil.