Cylinder head assembly

1. Install the camshaft housing dowels.

2. Lubricate the valve stems with engine oil.

3. Install valves.

4. Install valve stem seals.

5. Install the valve springs.

6. Compress the valve springs and install the cotters.

7. Install the valve cover.

8. Install thermostat.

9. Install the thermostat housing.

10. Install the thermostat housing screws and tighten them to 20 Nm.

11. Install the intake manifold studs.

12. Install the intake manifold gasket.

13. Install the intake manifold and tighten the nuts to 25 Nm.

14. Install the spark plugs and tighten to 40 Nm.

15. Install the exhaust manifold studs.

16. Install the exhaust manifold gasket.

17. Install the exhaust manifold and tighten the nuts to 25 Nm.

18. Install the exhaust manifold heat shield and tighten the screws to 15 Nm.

19. Install the coolant temperature sensor and tighten to 20 Nm.

20. Install the cylinder head along with the intake manifold and exhaust manifold.