Light control switch
The tip of the switch has three fixed positions:
- OFF: turn off all external lights;
: turn on parking, position, license plate and dashboard lights;
: turn on low beam headlights and all lights.
When the ignition key is turned to the LOCK or ACC position, the headlights turn off automatically.
Battery protection device from discharging
If the lighting control switch is set to the
or position, when the key is removed from the ignition and the doors are opened, the device automatically turns off the headlights.
Turn signal control lever
Pushing the lever up turns on the right turn signal. Pushing the lever down turns on the left turn signal. After the turn is completed, the lever automatically returns to its original position.
When changing lanes, partially move and hold the turn signal control lever. When released, the lever returns to its normal position.
High Beam Switch
To turn on the high beams, push the lever towards the dashboard. At the same time, the high beam indicator light will come on.
To turn off the high beam headlights, return the lever to its original position.
High beam signaling
To signal high beam headlights, pull the lever towards you and release.
Front fog light switch (option)
Set the ring switch to the ON position. The lighting control switch must be set to
or
To turn off the fog lights, turn the ring switch to the OFF position.
Rear fog light switch
To turn on the rear fog light, turn the end of the windshield wiper/washer while the low beam is on.
Windscreen wipers
The windscreen wipers operate when the ignition is on. To turn on the wipers, set the lever to one of four positions:
- OFF: home position, wipers off;
- INT: intermittent wiper operation;
- LO: low wiper speed;
- HI: high wiper speed.
If you briefly move the lever to the INT position, and then release it, the wiper blades will work one complete cycle.
Windshield washer
To turn on the windshield washer, pull the lever towards you. When holding the lever for more than 0.6 seconds, in addition to blasting the glass, the windshield washer brushes will also turn on. To prevent damage to the motor, do not operate the washer for more than 10 seconds.
Emergency light button
To turn on the hazard warning lights, press the button on the center console.
Pressing the button again turns off the hazard warning lights.
Headlight range adjuster
The positions of the regulator are set depending on the degree of vehicle loading:
- 0: no more than 2 people in the cabin;
- 1:5 people in the cabin;
- 2: 5 people in the cabin and cargo in the trunk;
- 3: driver and cargo no more than 316 kg in the trunk.