Odometer mode selection button
Odometer and current mileage indicator
The odometer shows the total mileage of the vehicle in kilometers. There are two independent mileage indicators that show the distance the vehicle has traveled since the indicator was last reset to zero (counter reset). To reset the odometer, press and hold the mode button until the odometer resets to zero. By pressing the mode select button, you can switch the odometer from trip A to trip B.
Tachometer, fuel gauge and coolant temperature gauge
The tachometer shows the engine speed in thousands of revolutions per minute (x1000 rpm).
Caution: To improve economy, keep the engine speed between 2000 and 3000 rpm.
Avoid exceeding the permissible engine speed (the tachometer needle should not go into the red sector of the scale).
Do not exceed the maximum allowable rpm recommended by the manufacturer during the break-in period of the vehicle.
Fuel tank gauge with minimum level indicator
The device shows the relative level of fuel in the fuel tank (fuel tank filling capacity is 45 liters).
Minimum fuel level indicator in the tank
The indicator turns on when approximately 7.5 liters of fuel remain in the tank.
Attention: it is not recommended to drive with a minimum amount of fuel in the tank, as this may damage the exhaust gas catalytic converter.