Withdrawal
1. Release the parking brake.
2. Depress the brake pedal at least 10 times until the vibration of the adjusting spring on the adjusting nut stops on each brake drum.
3. Raise and secure the car well.
4. Remove rear wheels.
5. Loosen the nut.
6. Remove the brake drum.
7. Using the rear brake adjuster nut, turn the adjuster inward until sufficient brake force is applied to the brake drum.
8. Make sure the parking brake lever stops are against the edge of the brake shoe rib. Otherwise, loosen the parking brake cable at the equalizer.
Installation
1. Install the rear brake drum and tighten the mounting screw to 200 Nm.
2. Install the rear wheels.
Attention: it is necessary to press the brake pedal more than 10 times. The gap between the brake pads and the drum will be adjusted when no more clicking is heard.
3. Press the brake pedal until the adjusting drive stops clicking.
4. Adjust the parking brake.