Rear seat cushion
Withdrawal
1. Remove the screw at the base of the rear seatback.
2. Raise and remove the rear seat cushion.
Rear seat back
3. Remove the rear seat cushion. See above.
4. Loosen the fastening screws.
5. Raise and remove the seatback.
Split rear seat back
6. While pressing the latch, lower the rear seatbacks.
7. Turn off screws of fastening of loops to a body.
8. Remove the rear seat backs
Latch of a back of a back seat assy
9. Remove the rear seat back latch release handle.
10. Remove an overlay of a back of a back seat.
11. Turn off screws of fastening and remove a clamp in gathering.
Installation
Installation is carried out in the reverse order of removal.
When installing, tighten the fasteners to the following torques:
- fixing screws of the latch assembly - 20 Nm;
- fixing bracket screws - 24 Nm;
- rear seat belt lower anchor bolt - 38 Nm;
- rear seat cushion hinge screws - 25 Nm;
- rear seat backrest screws - 25 Nm.
Seat covers
The rear seat back cover is described, all other covers are similar.
Withdrawal
Remove the backrest and/or seat cushion as described above.
Remove the rings or fasteners from the backrest and/or from the seat cushion.
